Overview
At Flight Level Engineering I design and substantiate the modifications that turn light aircraft into variable-stability in-flight simulators. As the company’s only mechanical engineer, I own each modification from the first sketch to the installed part.
The problem
Every change to a flying aircraft has to be proven safe before it is built. Each modification needs a design that fits the existing structure, analysis against the flight loads it will see, and documentation that holds up to independent review.
Approach
- Design the modification in SolidWorks, much of it sheet metal, sized to fit the existing structure.
- Run static FEA in SolidWorks Simulation against the specified aircraft g-load cases.
- Substantiate every bolted and fastened joint with hand calculations.
- Write a Configuration Control Request documenting the design, analysis, and safety case.
- Present the work at a Configuration Control Board, where it is checked and challenged.
Results
- 20+ modifications delivered, often several running in parallel.
- Every analysis independently checked by a second engineer and the installing mechanic.
- Drawings and reusable templates that get parts to the shop faster.
Gallery
To fill in: Add one sanitized example: a part, its load case, the method, and the margin of safety, with no proprietary details. Confirm with your employer before naming the aircraft or program.